diff --git a/include/asm-arm/assembler.h b/include/asm-arm/assembler.h new file mode 100644 index 0000000..fce8328 --- /dev/null +++ b/include/asm-arm/assembler.h @@ -0,0 +1,101 @@ +/* + * linux/include/asm-arm/assembler.h + * + * Copyright (C) 1996-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains arm architecture specific defines + * for the different processors. + * + * Do not include any C declarations in this file - it is included by + * assembler source. + */ +#ifndef __ASSEMBLY__ +#error "Only include this from assembly code" +#endif + +#include + +/* + * Endian independent macros for shifting bytes within registers. + */ +#ifndef __ARMEB__ +#define pull lsr +#define push lsl +#define get_byte_0 lsl #0 +#define get_byte_1 lsr #8 +#define get_byte_2 lsr #16 +#define get_byte_3 lsr #24 +#define put_byte_0 lsl #0 +#define put_byte_1 lsl #8 +#define put_byte_2 lsl #16 +#define put_byte_3 lsl #24 +#else +#define pull lsl +#define push lsr +#define get_byte_0 lsr #24 +#define get_byte_1 lsr #16 +#define get_byte_2 lsr #8 +#define get_byte_3 lsl #0 +#define put_byte_0 lsl #24 +#define put_byte_1 lsl #16 +#define put_byte_2 lsl #8 +#define put_byte_3 lsl #0 +#endif + +/* + * Data preload for architectures that support it + */ +#if __LINUX_ARM_ARCH__ >= 5 +#define PLD(code...) code +#else +#define PLD(code...) +#endif + +/* + * Enable and disable interrupts + */ +#if __LINUX_ARM_ARCH__ >= 6 + .macro disable_irq + cpsid i + .endm + + .macro enable_irq + cpsie i + .endm +#else + .macro disable_irq + msr cpsr_c, #PSR_I_BIT | SVC_MODE + .endm + + .macro enable_irq + msr cpsr_c, #SVC_MODE + .endm +#endif + +/* + * Save the current IRQ state and disable IRQs. Note that this macro + * assumes FIQs are enabled, and that the processor is in SVC mode. + */ + .macro save_and_disable_irqs, oldcpsr + mrs \oldcpsr, cpsr + disable_irq + .endm + +/* + * Restore interrupt state previously stored in a register. We don't + * guarantee that this will preserve the flags. + */ + .macro restore_irqs, oldcpsr + msr cpsr_c, \oldcpsr + .endm + +#define USER(x...) \ +9999: x; \ + .section __ex_table,"a"; \ + .align 3; \ + .long 9999b,9001f; \ + .previous diff --git a/include/asm-arm/linkage.h b/include/asm-arm/linkage.h new file mode 100644 index 0000000..dbe4b4e --- /dev/null +++ b/include/asm-arm/linkage.h @@ -0,0 +1,7 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define __ALIGN .align 0 +#define __ALIGN_STR ".align 0" + +#endif diff --git a/include/asm-arm/string.h b/include/asm-arm/string.h index c3ea582..3fb0ab4 100644 --- a/include/asm-arm/string.h +++ b/include/asm-arm/string.h @@ -12,10 +12,10 @@ extern char * strrchr(const char * s, int c); #undef __HAVE_ARCH_STRCHR extern char * strchr(const char * s, int c); -#undef __HAVE_ARCH_MEMCPY +#define __HAVE_ARCH_MEMCPY extern void * memcpy(void *, const void *, __kernel_size_t); -#undef __HAVE_ARCH_MEMMOVE +#define __HAVE_ARCH_MEMMOVE extern void * memmove(void *, const void *, __kernel_size_t); #undef __HAVE_ARCH_MEMCHR diff --git a/include/linux/linkage.h b/include/linux/linkage.h new file mode 100644 index 0000000..6c9873f --- /dev/null +++ b/include/linux/linkage.h @@ -0,0 +1,67 @@ +#ifndef _LINUX_LINKAGE_H +#define _LINUX_LINKAGE_H + +#include + +#ifdef __cplusplus +#define CPP_ASMLINKAGE extern "C" +#else +#define CPP_ASMLINKAGE +#endif + +#ifndef asmlinkage +#define asmlinkage CPP_ASMLINKAGE +#endif + +#ifndef prevent_tail_call +# define prevent_tail_call(ret) do { } while (0) +#endif + +#ifndef __ALIGN +#define __ALIGN .align 4,0x90 +#define __ALIGN_STR ".align 4,0x90" +#endif + +#ifdef __ASSEMBLY__ + +#define ALIGN __ALIGN +#define ALIGN_STR __ALIGN_STR + +#ifndef ENTRY +#define ENTRY(name) \ + .globl name; \ + ALIGN; \ + name: +#endif + +#define KPROBE_ENTRY(name) \ + .pushsection .kprobes.text, "ax"; \ + ENTRY(name) + +#define KPROBE_END(name) \ + END(name); \ + .popsection + +#ifndef END +#define END(name) \ + .size name, .-name +#endif + +#ifndef ENDPROC +#define ENDPROC(name) \ + .type name, @function; \ + END(name) +#endif + +#endif + +#define NORET_TYPE /**/ +#define ATTRIB_NORET __attribute__((noreturn)) +#define NORET_AND noreturn, + +#ifndef FASTCALL +#define FASTCALL(x) x +#define fastcall +#endif + +#endif diff --git a/lib_arm/Makefile b/lib_arm/Makefile index 4469361..7c43d51 100644 --- a/lib_arm/Makefile +++ b/lib_arm/Makefile @@ -31,6 +31,8 @@ SOBJS-y += _divsi3.o SOBJS-y += _modsi3.o SOBJS-y += _udivsi3.o SOBJS-y += _umodsi3.o +SOBJS-y += memcpy.o +SOBJS-y += memmove.o COBJS-y += board.o COBJS-y += bootm.o diff --git a/lib_arm/copy_template.S b/lib_arm/copy_template.S new file mode 100644 index 0000000..cab355c --- /dev/null +++ b/lib_arm/copy_template.S @@ -0,0 +1,255 @@ +/* + * linux/arch/arm/lib/copy_template.s + * + * Code template for optimized memory copy functions + * + * Author: Nicolas Pitre + * Created: Sep 28, 2005 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * This can be used to enable code to cacheline align the source pointer. + * Experiments on tested architectures (StrongARM and XScale) didn't show + * this a worthwhile thing to do. That might be different in the future. + */ +//#define CALGN(code...) code +#define CALGN(code...) + +/* + * Theory of operation + * ------------------- + * + * This file provides the core code for a forward memory copy used in + * the implementation of memcopy(), copy_to_user() and copy_from_user(). + * + * The including file must define the following accessor macros + * according to the need of the given function: + * + * ldr1w ptr reg abort + * + * This loads one word from 'ptr', stores it in 'reg' and increments + * 'ptr' to the next word. The 'abort' argument is used for fixup tables. + * + * ldr4w ptr reg1 reg2 reg3 reg4 abort + * ldr8w ptr, reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + * + * This loads four or eight words starting from 'ptr', stores them + * in provided registers and increments 'ptr' past those words. + * The'abort' argument is used for fixup tables. + * + * ldr1b ptr reg cond abort + * + * Similar to ldr1w, but it loads a byte and increments 'ptr' one byte. + * It also must apply the condition code if provided, otherwise the + * "al" condition is assumed by default. + * + * str1w ptr reg abort + * str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + * str1b ptr reg cond abort + * + * Same as their ldr* counterparts, but data is stored to 'ptr' location + * rather than being loaded. + * + * enter reg1 reg2 + * + * Preserve the provided registers on the stack plus any additional + * data as needed by the implementation including this code. Called + * upon code entry. + * + * exit reg1 reg2 + * + * Restore registers with the values previously saved with the + * 'preserv' macro. Called upon code termination. + */ + + + enter r4, lr + + subs r2, r2, #4 + blt 8f + ands ip, r0, #3 + PLD( pld [r1, #0] ) + bne 9f + ands ip, r1, #3 + bne 10f + +1: subs r2, r2, #(28) + stmfd sp!, {r5 - r8} + blt 5f + + CALGN( ands ip, r1, #31 ) + CALGN( rsb r3, ip, #32 ) + CALGN( sbcnes r4, r3, r2 ) @ C is always set here + CALGN( bcs 2f ) + CALGN( adr r4, 6f ) + CALGN( subs r2, r2, r3 ) @ C gets set + CALGN( add pc, r4, ip ) + + PLD( pld [r1, #0] ) +2: PLD( subs r2, r2, #96 ) + PLD( pld [r1, #28] ) + PLD( blt 4f ) + PLD( pld [r1, #60] ) + PLD( pld [r1, #92] ) + +3: PLD( pld [r1, #124] ) +4: ldr8w r1, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f + subs r2, r2, #32 + str8w r0, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f + bge 3b + PLD( cmn r2, #96 ) + PLD( bge 4b ) + +5: ands ip, r2, #28 + rsb ip, ip, #32 + addne pc, pc, ip @ C is always clear here + b 7f +6: nop + ldr1w r1, r3, abort=20f + ldr1w r1, r4, abort=20f + ldr1w r1, r5, abort=20f + ldr1w r1, r6, abort=20f + ldr1w r1, r7, abort=20f + ldr1w r1, r8, abort=20f + ldr1w r1, lr, abort=20f + + add pc, pc, ip + nop + nop + str1w r0, r3, abort=20f + str1w r0, r4, abort=20f + str1w r0, r5, abort=20f + str1w r0, r6, abort=20f + str1w r0, r7, abort=20f + str1w r0, r8, abort=20f + str1w r0, lr, abort=20f + + CALGN( bcs 2b ) + +7: ldmfd sp!, {r5 - r8} + +8: movs r2, r2, lsl #31 + ldr1b r1, r3, ne, abort=21f + ldr1b r1, r4, cs, abort=21f + ldr1b r1, ip, cs, abort=21f + str1b r0, r3, ne, abort=21f + str1b r0, r4, cs, abort=21f + str1b r0, ip, cs, abort=21f + + exit r4, pc + +9: rsb ip, ip, #4 + cmp ip, #2 + ldr1b r1, r3, gt, abort=21f + ldr1b r1, r4, ge, abort=21f + ldr1b r1, lr, abort=21f + str1b r0, r3, gt, abort=21f + str1b r0, r4, ge, abort=21f + subs r2, r2, ip + str1b r0, lr, abort=21f + blt 8b + ands ip, r1, #3 + beq 1b + +10: bic r1, r1, #3 + cmp ip, #2 + ldr1w r1, lr, abort=21f + beq 17f + bgt 18f + + + .macro forward_copy_shift pull push + + subs r2, r2, #28 + blt 14f + + CALGN( ands ip, r1, #31 ) + CALGN( rsb ip, ip, #32 ) + CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( subcc r2, r2, ip ) + CALGN( bcc 15f ) + +11: stmfd sp!, {r5 - r9} + + PLD( pld [r1, #0] ) + PLD( subs r2, r2, #96 ) + PLD( pld [r1, #28] ) + PLD( blt 13f ) + PLD( pld [r1, #60] ) + PLD( pld [r1, #92] ) + +12: PLD( pld [r1, #124] ) +13: ldr4w r1, r4, r5, r6, r7, abort=19f + mov r3, lr, pull #\pull + subs r2, r2, #32 + ldr4w r1, r8, r9, ip, lr, abort=19f + orr r3, r3, r4, push #\push + mov r4, r4, pull #\pull + orr r4, r4, r5, push #\push + mov r5, r5, pull #\pull + orr r5, r5, r6, push #\push + mov r6, r6, pull #\pull + orr r6, r6, r7, push #\push + mov r7, r7, pull #\pull + orr r7, r7, r8, push #\push + mov r8, r8, pull #\pull + orr r8, r8, r9, push #\push + mov r9, r9, pull #\pull + orr r9, r9, ip, push #\push + mov ip, ip, pull #\pull + orr ip, ip, lr, push #\push + str8w r0, r3, r4, r5, r6, r7, r8, r9, ip, , abort=19f + bge 12b + PLD( cmn r2, #96 ) + PLD( bge 13b ) + + ldmfd sp!, {r5 - r9} + +14: ands ip, r2, #28 + beq 16f + +15: mov r3, lr, pull #\pull + ldr1w r1, lr, abort=21f + subs ip, ip, #4 + orr r3, r3, lr, push #\push + str1w r0, r3, abort=21f + bgt 15b + CALGN( cmp r2, #0 ) + CALGN( bge 11b ) + +16: sub r1, r1, #(\push / 8) + b 8b + + .endm + + + forward_copy_shift pull=8 push=24 + +17: forward_copy_shift pull=16 push=16 + +18: forward_copy_shift pull=24 push=8 + + +/* + * Abort preamble and completion macros. + * If a fixup handler is required then those macros must surround it. + * It is assumed that the fixup code will handle the private part of + * the exit macro. + */ + + .macro copy_abort_preamble +19: ldmfd sp!, {r5 - r9} + b 21f +20: ldmfd sp!, {r5 - r8} +21: + .endm + + .macro copy_abort_end + ldmfd sp!, {r4, pc} + .endm + diff --git a/lib_arm/memcpy.S b/lib_arm/memcpy.S new file mode 100644 index 0000000..7e71d67 --- /dev/null +++ b/lib_arm/memcpy.S @@ -0,0 +1,59 @@ +/* + * linux/arch/arm/lib/memcpy.S + * + * Author: Nicolas Pitre + * Created: Sep 28, 2005 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + + .macro ldr1w ptr reg abort + ldr \reg, [\ptr], #4 + .endm + + .macro ldr4w ptr reg1 reg2 reg3 reg4 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4} + .endm + + .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm + + .macro ldr1b ptr reg cond=al abort + ldr\cond\()b \reg, [\ptr], #1 + .endm + + .macro str1w ptr reg abort + str \reg, [\ptr], #4 + .endm + + .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm + + .macro str1b ptr reg cond=al abort + str\cond\()b \reg, [\ptr], #1 + .endm + + .macro enter reg1 reg2 + stmdb sp!, {r0, \reg1, \reg2} + .endm + + .macro exit reg1 reg2 + ldmfd sp!, {r0, \reg1, \reg2} + .endm + + .text + +/* Prototype: void *memcpy(void *dest, const void *src, size_t n); */ + +ENTRY(memcpy) + +#include "copy_template.S" + diff --git a/lib_arm/memmove.S b/lib_arm/memmove.S new file mode 100644 index 0000000..ef7fddc --- /dev/null +++ b/lib_arm/memmove.S @@ -0,0 +1,206 @@ +/* + * linux/arch/arm/lib/memmove.S + * + * Author: Nicolas Pitre + * Created: Sep 28, 2005 + * Copyright: (C) MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +/* + * This can be used to enable code to cacheline align the source pointer. + * Experiments on tested architectures (StrongARM and XScale) didn't show + * this a worthwhile thing to do. That might be different in the future. + */ +//#define CALGN(code...) code +#define CALGN(code...) + + .text + +/* + * Prototype: void *memmove(void *dest, const void *src, size_t n); + * + * Note: + * + * If the memory regions don't overlap, we simply branch to memcpy which is + * normally a bit faster. Otherwise the copy is done going downwards. This + * is a transposition of the code from copy_template.S but with the copy + * occurring in the opposite direction. + */ + +ENTRY(memmove) + + subs ip, r0, r1 + cmphi r2, ip + bls memcpy + + stmfd sp!, {r0, r4, lr} + add r1, r1, r2 + add r0, r0, r2 + subs r2, r2, #4 + blt 8f + ands ip, r0, #3 + PLD( pld [r1, #-4] ) + bne 9f + ands ip, r1, #3 + bne 10f + +1: subs r2, r2, #(28) + stmfd sp!, {r5 - r8} + blt 5f + + CALGN( ands ip, r1, #31 ) + CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( bcs 2f ) + CALGN( adr r4, 6f ) + CALGN( subs r2, r2, ip ) @ C is set here + CALGN( add pc, r4, ip ) + + PLD( pld [r1, #-4] ) +2: PLD( subs r2, r2, #96 ) + PLD( pld [r1, #-32] ) + PLD( blt 4f ) + PLD( pld [r1, #-64] ) + PLD( pld [r1, #-96] ) + +3: PLD( pld [r1, #-128] ) +4: ldmdb r1!, {r3, r4, r5, r6, r7, r8, ip, lr} + subs r2, r2, #32 + stmdb r0!, {r3, r4, r5, r6, r7, r8, ip, lr} + bge 3b + PLD( cmn r2, #96 ) + PLD( bge 4b ) + +5: ands ip, r2, #28 + rsb ip, ip, #32 + addne pc, pc, ip @ C is always clear here + b 7f +6: nop + ldr r3, [r1, #-4]! + ldr r4, [r1, #-4]! + ldr r5, [r1, #-4]! + ldr r6, [r1, #-4]! + ldr r7, [r1, #-4]! + ldr r8, [r1, #-4]! + ldr lr, [r1, #-4]! + + add pc, pc, ip + nop + nop + str r3, [r0, #-4]! + str r4, [r0, #-4]! + str r5, [r0, #-4]! + str r6, [r0, #-4]! + str r7, [r0, #-4]! + str r8, [r0, #-4]! + str lr, [r0, #-4]! + + CALGN( bcs 2b ) + +7: ldmfd sp!, {r5 - r8} + +8: movs r2, r2, lsl #31 + ldrneb r3, [r1, #-1]! + ldrcsb r4, [r1, #-1]! + ldrcsb ip, [r1, #-1] + strneb r3, [r0, #-1]! + strcsb r4, [r0, #-1]! + strcsb ip, [r0, #-1] + ldmfd sp!, {r0, r4, pc} + +9: cmp ip, #2 + ldrgtb r3, [r1, #-1]! + ldrgeb r4, [r1, #-1]! + ldrb lr, [r1, #-1]! + strgtb r3, [r0, #-1]! + strgeb r4, [r0, #-1]! + subs r2, r2, ip + strb lr, [r0, #-1]! + blt 8b + ands ip, r1, #3 + beq 1b + +10: bic r1, r1, #3 + cmp ip, #2 + ldr r3, [r1, #0] + beq 17f + blt 18f + + + .macro backward_copy_shift push pull + + subs r2, r2, #28 + blt 14f + + CALGN( ands ip, r1, #31 ) + CALGN( rsb ip, ip, #32 ) + CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( subcc r2, r2, ip ) + CALGN( bcc 15f ) + +11: stmfd sp!, {r5 - r9} + + PLD( pld [r1, #-4] ) + PLD( subs r2, r2, #96 ) + PLD( pld [r1, #-32] ) + PLD( blt 13f ) + PLD( pld [r1, #-64] ) + PLD( pld [r1, #-96] ) + +12: PLD( pld [r1, #-128] ) +13: ldmdb r1!, {r7, r8, r9, ip} + mov lr, r3, push #\push + subs r2, r2, #32 + ldmdb r1!, {r3, r4, r5, r6} + orr lr, lr, ip, pull #\pull + mov ip, ip, push #\push + orr ip, ip, r9, pull #\pull + mov r9, r9, push #\push + orr r9, r9, r8, pull #\pull + mov r8, r8, push #\push + orr r8, r8, r7, pull #\pull + mov r7, r7, push #\push + orr r7, r7, r6, pull #\pull + mov r6, r6, push #\push + orr r6, r6, r5, pull #\pull + mov r5, r5, push #\push + orr r5, r5, r4, pull #\pull + mov r4, r4, push #\push + orr r4, r4, r3, pull #\pull + stmdb r0!, {r4 - r9, ip, lr} + bge 12b + PLD( cmn r2, #96 ) + PLD( bge 13b ) + + ldmfd sp!, {r5 - r9} + +14: ands ip, r2, #28 + beq 16f + +15: mov lr, r3, push #\push + ldr r3, [r1, #-4]! + subs ip, ip, #4 + orr lr, lr, r3, pull #\pull + str lr, [r0, #-4]! + bgt 15b + CALGN( cmp r2, #0 ) + CALGN( bge 11b ) + +16: add r1, r1, #(\pull / 8) + b 8b + + .endm + + + backward_copy_shift push=8 pull=24 + +17: backward_copy_shift push=16 pull=16 + +18: backward_copy_shift push=24 pull=8 +